NONMEM Users Network Archive

Hosted by Cognigen

RE: PDx-Pop/NONMEM Line Character Limit?

From: Fidler,Matt,FORT WORTH,R&D <Matt.Fidler>
Date: Tue, 25 Aug 2009 14:01:28 -0500

Susan,

If I remember correctly, Below NONMEM 6.2, the line limit is 80. =
Perhaps with NONMEM 6.2 the limit is 157-162 (as demonstrated by your =
error); It should be documented in the release notes.

As stated by Bill, the simplest method is to split the lines:

TVCL = X
TVCL = TVCL + Y

In the programming language of NONMEM this is equivalent to:

TVCL = X + Y

Matt.

________________________________
From: owner-nmusers
On Behalf Of Hudachek,Susan
Sent: Tuesday, August 25, 2009 11:42 AM
To: nmusers
Subject: [NMusers] PDx-Pop/NONMEM Line Character Limit?

Greetings! Does anyone know if PDx-Pop/NONMEM has a line character =
limit? I am trying to run a model with the following line:

TVCL=THETA(1)+THETA(7)*(VMLL-49827.76)+THETA(8)*(KML-96.226)+THETA(9)*(=
VLRP-5.659)+THETA(10)*(VLSP-83.615)+THETA(11)*(WT-76.638)+THETA(12)*(VLB-=
6.778)+THETA(13)*(VLG-1.606)

And I get the following error:

AN ERROR WAS FOUND ON LINE 10 AT THE APPROXIMATE POSITION NOTED:
    =
TVCL=THETA(1)+THETA(7)*(VMLL-49827.76)+THETA(8)*(KML-96.226)+THETA(9)*(=
VLRP-5.659)+THETA(10)*(VLSP-83.615)+THETA(11)*(WT-76.638)+THETA(12)*(VLB-=
6.778)+THETA(
                                                                         =
                                                                         =
                            X

484 SUBSCRIPT MUST BE AN INTEGER CONSTANT.
fsubs did not get created by NM-TRAN. No NONMEM execution.
Any ideas would be greatly appreciated! Thanks in advance!
Susan
Susan Hudachek, M.S., Ph.D.
Animal Cancer Center
Veterinary Teaching Hospital
Colorado State University
300 West Drake Road
Fort Collins, CO 80523-1620
PHONE: (970) 219-7599
FAX: (970) 297-1254
EMAIL: Susan.Hudachek



This e-mail (including any attachments) is confidential and may be =
legally privileged. If you are not an intended recipient or an =
authorized representative of an intended recipient, you are prohibited =
from using, copying or distributing the information in this e-mail or =
its attachments. If you have received this e-mail in error, please =
notify the sender immediately by return e-mail and delete all copies of =
this message and any attachments.
Thank you.

Received on Tue Aug 25 2009 - 15:01:28 EDT

The NONMEM Users Network is maintained by ICON plc. Requests to subscribe to the network should be sent to: nmusers-request@iconplc.com.

Once subscribed, you may contribute to the discussion by emailing: nmusers@globomaxnm.com.