NONMEM Users Network Archive

Hosted by Cognigen

RE: g77 Problem

From: Lloyd Whitfield <lrwhitfield>
Date: Mon, 28 Jun 2010 16:10:50 -0400

Dear Serge,

Thank you for your suggestions. I directly edited the LIBRARY_PATH and PATH
so that both would include c:\g77\bin and c:\g77\lib and rebooted the
computer. Unfortunately, this did not correct my problem. Thus, the
environment variables do not appear to be the problem.

What I can't figure out is why g77 does not work now while it did
previously. Reinstalling g77 didn't help either.

Any other ideas will be appreciated.


Lloyd Whitfield, PhD
President, LW Solutions, LLC
9207 Cambridge Dr
Saline, MI 48176
Phone: 734-786-2877
FAX: 734-944-2712
Cell: 734-649-4386
-----Original Message-----
From: owner-nmusers
Behalf Of Serge Guzy
Sent: Monday, June 28, 2010 2:02 PM
To: Lloyd Whitfield; nmusers
Subject: RE: [NMusers] g77 Problem

Dear Lloyd
I suggest you to edit locally the path for bin and lib. I had a similar
problem with SADAPT depending on the compiler I was using (g95 in my
You create a small script that includes the bin and lib path. For
example, here is the script I used to force g95 to work with sadapt. In
the set path, I had to both add the bin and lib path. This had to be
done with Vista bit not XP.
Serge Guzy; PhD
President, CEO; POP_PHARM


-----Original Message-----
From: owner-nmusers
On Behalf Of Lloyd Whitfield
Sent: Monday, June 28, 2010 9:53 AM
To: nmusers
Subject: RE: [NMusers] g77 Problem


Good ideas. Unfortunately, I forgot to mention in my first email that I
checked the environment variables and I have
LIBRARY_PATH=c:\g77\lib (this is where I have g77 installed) and
C:\g77\bin is in the PATH.

Any other ideas will be appreciated.


-----Original Message-----
From: owner-nmusers
Behalf Of andreas.krause
Sent: Monday, June 28, 2010 11:15 AM
To: Lloyd Whitfield
Cc: nmusers
Subject: Re: [NMusers] g77 Problem


the linker seems unable to find the library files to link them all
together with your code.
I suspect there are some environment variables missing on your system.
Open a DOS window and enter set

If you do not see a line that looks similar to
that might well be the problem.
You should also have an entry in PATH similar to c:\g77\g77-2.95-mrg\bin

Right-click on "My computer", select System Properties, Advanced,
Environment variables, and add the specs for your system.


"Lloyd Whitfield" <lwsolutions
Sent by: owner-nmusers
06/28/2010 04:14 PM


[NMusers] g77 Problem

I have been using NONMEM VI with the g77 Fortran compiler on a Dell
running Vista since last year with no problems. After not using NONMEM
for some time, I tried to run a previously successful control file
yesterday and the job wouldn?t run. I suspected that the problem might
with the g77 compiler so I attempted to test g77 installation by
and running the ?hello.for? test file as described in the NONMEM
installation instructions. When I attempted to compile the file from a
command, I got the following:
C:\nmvi2\run>g77 hello.for -o hello.exe
Info: resolving __fmode by linking to __imp___fmode (auto-import)
Info: resolving __fpreset by linking to __imp___fpreset (auto-import)
ndefined reference to `__cpu_features_init'
ndefined reference to `_pei386_runtime_relocator'
fu000001.o:(.idata$2+0xc): undefined reference to `libmsvcrt_a_iname'
fu000002.o:(.idata$2+0xc): undefined reference to `libmsvcrt_a_iname'
fu000004.o:(.idata$2+0xc): undefined reference to `libmsvcrt_a_iname'
fu000005.o:(.idata$2+0xc): undefined reference to `libmsvcrt_a_iname'
nmth000000.o:(.idata$4+0x0): undefined reference to `_nm___fmode'
nmth000003.o:(.idata$4+0x0): undefined reference to `_nm___fpreset'
collect2: ld returned 1 exit status
I reinstalled the g77 compiler and ran the hello.for file and got the
same message again as shown above. As I have had a problem with bad RAM
the laptop before, I tested the RAM and found that the ram was fine. I

have no idea what the message means. If anyone has had this experience
before or could offer a suggestion on what I might try to overcome the
problem, I would be greatly appreciate any suggestions.
Lloyd Whitfield

The information of this email and in any file transmitted with it is
strictly confidential and may be legally privileged.
It is intended solely for the addressee. If you are not the intended
recipient, any copying, distribution or any other use of this email is
prohibited and may be unlawful. In such case, you should please notify
sender immediately and destroy this email.
The content of this email is not legally binding unless confirmed by
Any views expressed in this message are those of the individual sender,
except where the message states otherwise and the sender is authorised
state them to be the views of the sender's company. For further
about Actelion please see our website at

The information contained in this email message may
contain confidential or legally privileged information and is intended
for the use of the named recipient(s). No confidentiality or privilege is
waived or lost by any transmission error. If the reader of this message is
not the intended recipient, please immediately delete the e-mail and all
copies of it from your system, destroy any hard copies of it and notify the
sender either by telephone or return e-mail. Any direct or indirect use,
disclosure, distribution, printing, or copying of any part of this message
prohibited. Any views expressed in this message are those of the individual

sender, except where the message states otherwise and the sender is
authorized to state them to be the views of XOMA.
Received on Mon Jun 28 2010 - 16:10:50 EDT

The NONMEM Users Network is maintained by ICON plc. Requests to subscribe to the network should be sent to:

Once subscribed, you may contribute to the discussion by emailing: